产品banner
your current location : Home >> Products >> Other country certification

KeywordsKeywords

ContactContact Us

DONGGUAN STANDARD TEST TECHNOLOGY Co.,Ltd

Service hotline: 076983061332

Consultation hotline: 18627268338

Email: 18627268338@163.com
web:en.stt-lab.com

Address: 503, Mingxin Building, No. 11, Guantai Road, Guancheng District, Dongguan City

Australia CTICK certification process

2021-08-11 20:16:58
a

Ctick certification is an EMC certification project in Australia. The laboratory provides c-tick test report, and then the Australian importer registers with c-tick test report. A / c-tick is an authentication mark issued by the Australian Communications Authority (ACA) for communication equipment. Shenzhen huanciwei testing agency can help customers handle ctick certification of various products. Welcome to call 4008-707-283 for more details!


Ctick certification mark


The information of Australian suppliers must be marked next to the c-tick mark as required, so that ACA can effectively trace back to the suppliers responsible for EMC of the products when sampling products in the market. The identification of information includes four aspects:


1. The registered name and address of the Australian supplier.


2. Australian company number


3. The number issued by ACA to the Australian supplier.


4. The Australian registered trademark used by the product in the Australian market.


Radio communication equipment or special electrical and electronic equipment must meet the relevant label notice requirements, otherwise they cannot be sold or supplied to Australia. The c-tick is a sequential label, which is applicable to the material items covered by the label notice below


1. Radio communication (sequence tag with transmission) bulletin 2001 briefly describes compliance with EMC adjusted arrangements


2. Radio equipment (sequence label) Notice No. 11996 shows and briefly describes the arrangement of compliance adjustment of radio communication


3. The brief description of radio communication (sequence label - electromagnetic radiation) Notice 2003 is subject to the EMR adjustment arrangement. Under the EMC adjustment arrangement, the sequence label must be attached to the product before the product is supplied to Australia. It is also a sequential label for non radio communication products that must comply with electromagnetic radiation (EMR) rules. For telecom products, EMR is covered by a-tick sequence label, and the sequence label on c-tick must have supplier information that can identify the supplier. This information may take the supplier code issued by ACA, the number of Australian company or other forms detailed in the relevant label notice. More information about the use of c-tickmark can be obtained on the ACA website.


Ctick certified product classification:


In Australia, EMC is monitored by ACA (Australian Communications Authority). Under the EMC system in Australia, products are divided into three categories. Suppliers must register with ACA and apply for the use of c-tick mark before selling class II and III products.


Class I products: products with low interference radiation to equipment using wireless spectrum, such as manual switch, simple relay, unidirectional squirrel cage inductive motor, resistance, etc. Such products can voluntarily apply for the use of c-tick mark during production and sales.


Class II products: products with high interference and radiation to equipment using wireless spectrum, such as switching power supply, electric welding machine, dimmer, most household appliances, etc.


Three types of products: products with high interference to equipment using wireless spectrum, i.e. products covered by cispr11 and cispr22. Since applicants applying for registration with ACA using the c-tick mark are limited to registered companies in Australia or New Zealand, they can apply through buyers in Australia or New Zealand or certification agencies of branches / partners in Australia or New Zealand.


Ctick certification process:


(1) The manufacturer or agent shall submit an oral or written preliminary application to the certification company.


(2) The applicant shall fill in the application form and send the application form, product instructions and technical documents to the certification company


(3) The certification company formulates the scheme and makes a quotation


(4) The applicant confirms the quotation, signs back the quotation, and sends the samples and relevant technical documents to the certification company


(5) Technical documents provided by the applicant


(6) The certification company sends a charge notice to the applicant, and the applicant prepays the certification fee according to the charge notice


(7) The certification company reviews the technical documents and organizes relevant certification activities


(8) If the technical documents are incomplete or do not use the specified language, the certification company will notify the applicant for improvement


(9) If the test fails, the certification company will timely notify the applicant and decide whether to suspend the project according to the situation, allowing the applicant to improve the product. The applicant shall change the technical data in the original application to reflect the actual situation after the change


(10) The certification company shall provide test reports or technical documents to the applicant


(11) The Australian importer Beishu & submits a report to apply for a registration number from the Australian Communications Authority (ACA).


HOME              E-commerce

ABOUT              NEWS

Test items              Inquiry

International              Contact

iso体系认证   Service hotline: 076983061332

iso体系认证   Consultation hotline: 18627268338

iso体系认证  Email: 18627268338@163.com

iso体系认证  Address: 503, Mingxin Building, No. 11, Guantai Road, Guancheng District, Dongguan City

iso体系认证